FoxAIR 9kW GL-9-1 Monobloc Heat Pump (R290 Propane)

Technical parameters of the product
The device operates on 230V voltage and 50Hz frequency. The IPX4 class used is a certificate of impeccable resistance to moisture. The maximum input power reaches 3kW, and the peak input current is 13.5A. The HIGHLY compressor and SHIMGE circulating pump are considerable assets. These components ensure high efficiency and energy saving.

ENERGY EFFICIENCY: The FOXair heat pump has high energy efficiency, which translates into lower operating costs compared to traditional heating systems such as gas or oil. Heat pumps typically achieve a coefficient of performance (COP) of 3 to 5, which means that for every unit of electricity consumed by the heat pump, 3 to 5 units of heat energy are obtained.

The FoxAIR 9kW 1-phase heat pump definitely stands out for its ecological qualities. The manufacturer used propane refrigerant R290, which does not harm the environment. Also noteworthy is the low CO2 equivalent of 0.0015 tons. The equipment presented is therefore an excellent choice for those who are not indifferent to the fate of the planet.

The device has a single fan with a DC motor. This component develops a speed in the range of 300 to 600 revolutions per minute. Sound pressure at a distance of 1 meter is 42 dB(A). In turn, the sound power level reaches 57dB, so compliance with EN12102 is maintained. The FoxAIR 9kW monoblock heat pump has a housing made of galvanized sheet metal and ASA.

Where will the Foxair 9kW monoblock pump perform well?
As a rule, the pump will work well in temperate climates, where the temperature rarely falls below -10°C. Such devices are an excellent choice for buildings with low heat demand. Thus, the product presented is recommended for owners of single-family houses, smaller residential buildings and small commercial and service establishments. Before making a purchase decision, carry out calculations taking into account the location, building characteristics and energy costs. It is advisable to consult a specialist during the planning process.

Technical specifications:

• Power supply: 230V~/50Hz
• Moisture resistance: IPX4
• Max input power: 3.0kW
• Max input current: 13.5A
• Water flow rate: 1m³/h
• Refrigerant / Refrigerant quantity: R290 / 0.5kg
• CO2 equivalent: 0.0015 tons
• Sound pressure (1m): 42 dB(A)
• Sound power level (EN12102): 57dB
• Net weight: 80kg
• Operating pressure (low side): 0.8MPa
• Operating pressure (high side): 3.0MPa
• Unit dimensions (L/W/H): 1167×407×795mm
• Transport dimensions (length/width/height): 1300×485×940mm
• Compressor: HIGHLY
• Circulation pump: SHIMGE
• Ambient temperature during operation: -25~43°C
• Number of fans: 1
• Fan motor type: DC motor
• Fan motor power range (min~max): 55~105W
• Fan speed (rpm): 300~600RPM
• Water connection: 1 inch
• Internal water pressure drop (at rated flow): 40kPa
• Circulating pump head: 7,5m
• Housing type: galvanized sheet metal+ASA

Heating conditions – Ambient temperature (DB/WB): 7/6°C, Water Temp (Input/Output): 30/35°C:

• Heating capacity range: 3.10~8.90kW
• Heating input power range: 0.65~2.10kW
• Heating mode current input range: 2,9~9,2A

Cooling conditions – Ambient temperature (DB/WB): 35/24°C, Water Temp (Input/Output): 12/7°C:

• Cooling capacity range: 1.20~5.72kW
• Cooling input power range: 0.65~2.40kW
• Cooling input current range: 2,9~10,5A

Hot water operating conditions – Ambient temperature (DB/WB): 20/15°C, Water Temp (Input/Output): 15/55°C:

• Capacity range for hot water: 3.92~10.68kW
• Input power range for hot water: 0.78~2.47kW
• Current input range for hot water: 3,4~10,8A